MMP

Quizzes

Construction

These quizzes have been designed to assist individuals in becoming a well rounded Fire and Life Safety Director. Croker’s quiz training module may be used in conjunction with Croker’s FDNY accredited course (and distributed course material) to aid in the learning process.
How to use this quiz training module:
Press the Get Started button below to begin. After selecting an answer, click the Next Question button to see if your answer is correct (green) or incorrect (red).
If correct, click Next Question again to proceed to the next slide. If incorrect, you may continue to try until you get the correct answer before moving on to the Next Question.

1 / 10

Question 1.
An F-60 Fire Guard, at a construction site, is allowed to patrol two (2) torch operations at the same time if the maximum distance does not exceed:

A. It is prohibited for a fire guard to conduct a fire watch for more than one torch operation

B. 50 feet

C. 25 feet

D. 100 feet

2 / 10

Question 2.
Which of the following is NOT required when hot work is conducted?

A. Hot work must be performed by a person with a Certificate of Fitness (C of F).

B. A fire watch shall be maintained for a minimum of 30 minutes after the conclusion of work

C. A valid permit must aways be obtained

D. Hot work areas shall not be less than 35’ from combustible materials or have appropriate shielding

3 / 10

Question 3.
Which statement is true regarding plenums and raceways?

A. Plenums are in ceiling and raceways are in floors

B. Plenums are in floors and raceways are in ceilings

C. Plenums and raceways are both in ceilings

D. Plenums and raceways are both in floors

4 / 10

Question 4.
The person responsible for hot work operations must:

A. Conduct pre-hot work check at least once per day after the conclusion of that day's hot work

B. Ensure the fire alarm on the hot work floor is on-line

C. Conduct pre-hot work check at least once per day prior to the start of that day's hot work

D. Maintain pre-hot work check reports for 30 minutes after the conclusion of the hot work

5 / 10

Question 5.
Generally speaking, all unsprinklered floor areas in an office building shall be segregated by one-hour fire separations into spaces or compartments not to exceed __________.

A. 8000 square feet

B. 6000 square feet

C. 7500 square feet

D. 5000 square feet

6 / 10

Question 6.
What precautions must be taken when hot work is being performed?

A. There must be one F-60 Fire Guard posted every 50 feet on the hot work floor.

B. An inspection must be performed before the start of operations and at least once a day during operations.

C. A minimum of one 2-A extinguisher must be within 50 feet of the location of the hot work operation.

D. Sprinkler system must be shut down to prevent accidental activation.

7 / 10

Question 7.
In which areas must hot work operations NOT be performed?

A. Where the fire alarm system is out-of-service

B. Free of combustible materials

C. Where the sprinkler protection is impaired

D. Where the sprinkler coverage is fully operational

8 / 10

Question 8.
When must the fire watch check for fire during torch operations?

A. During the operations, and when the operations are complete.

B. During the operations, when the operations are complete, and a half hour (30 minutes) later.

C. During the operations, when the operations are complete, a half hour (30 minutes) later, and a half hour (30 minutes) after that.

D. During the operations, when the operations are complete, a half hour (30 minutes) later and a hour (60 minutes) after that.

9 / 10

Question 9.
In a fully sprinklered Class B building, how large can an area be before a fire wall is required to compartment the area?

A. Unlimited

B. 7,500 sq. ft.

C. 15,000 sq. ft.

D. 10,000 sq. ft.

10 / 10

Question 10.
Hot work operations involving cutting or welding must be conducted how many feet away from combustible materials?

A. Minimum of 50 feet

B. Minimum of 100 feet

C. Minimum of 35 feet

D. Minimum of 25 feet

Your score is
The average score is 0%
0%

Construction

Quizzes

How to use this quiz training module:

Question 1.

Question 2.

Question 3.

Question 4.

Question 5.

Question 6.

Question 7.

Question 8.

Question 9.

Question 10.

#1 MMP Certification provider ® -

Certification Courses

Contact Info

Socials